当前位置 > 主页 > 万和大讲堂 >


南京CCIE培训分享:CCIE-RS Lab5.0考试大纲

2016-08-16 14:28

  思科公司于12月初发布了CCIERS5.0Lab考试大纲,同时也明确通知将于2014年6月4日正式开始实施RS5.0的Lab考试,新大纲在知识点、考试环节、考场实验环境方面均有比较大的变动,南京万和CCIE培训带大家一起来看看CCIE-RS Lab5.0考试大纲。


  CCIE Routing and Switching Lab Exam Version 5.0(CCIE-RS Lab5.0考试大纲)


  Exam


  Description: The CCIE? Routing and Switching Lab Exam version 5.0 is an


  eight-hour, hands-on exam which requires you to configure and


  troubleshoot a series of complex networks to given specifications.


  Knowledge of troubleshooting is an important skill and candidates are


  expected to diagnose and solve issues as part of the CCIE lab exam. You


  will not configure end-user systems, but are responsible for all devices


  residing in the network.


  The


  following topics are general guidelines for the content likely to be


  included on the exam. However, other related topics may also appear on


  any specific delivery of the exam. In order to better reflect the


  contents of the exam and for clarity purposes, the guidelines below may


  change at any time without notice.


  20% 1.0 Layer 2 Technologies


  1.1 LAN switching technologies


  1.1.a Implement and troubleshoot switch administration


  1.1.a (i) Managing MAC address table


  1.1.a (ii) errdisable recovery


  1.1.a (iii) L2 MTU


  1.1.b Implement and troubleshoot layer 2 protocols


  1.1.b (i) CDP, LLDP


  1.1.b (ii) UDLD


  1.1.c Implement and troubleshoot VLAN


  1.1.c (i) access ports


  1.1.c (ii) VLAN database


  1.1.c (iii) normal, extended VLAN, voice VLAN


  1.1.d Implement and troubleshoot trunking


  1.1.d (i) VTPv1, VTPv2, VTPv3, VTP pruning


  1.1.d (ii) dot1Q


  1.1.d (iii) Native VLAN


  1.1.d (iv) Manual pruning


  1.1.e Implement and troubleshoot etherchannel


  1.1.e (i) LACP, PAgP, manual


  1.1.e (ii) layer 2, layer 3


  1.1.e (iii) load-balancing


  1.1.e (iv) etherchannel misconfiguration guard


  1.1.f Implement and troubleshoot spanning-tree


  1.1.f (i) PVST+/RPVST+/MST


  1.1.f (ii) switch priority, port priority, path cost, STP timers


  1.1.f (iii) port fast, BPDUguard, BPDUfilter


  1.1.f (iv) loopguard, rootguard


  1.1.g Implement and troubleshoot other LAN switching technologies


  1.1.g (i) SPAN, RSPAN, ERSPAN


  1.2 Layer 2 Multicast


  1.2.a Implement and troubleshoot IGMP


  1.2.a (I) IGMPv1, IGMPv2, IGMPv3


  1.2.a (ii) IGMP snooping


  1.2.a (iii) IGMP querier


  1.2.a (iv) IGMP filter


  1.2.a (v) IGMP proxy


  1.3 Layer 2 WAN circuit technologies


  1.3.a Implement and troubleshoot HDLC


  1.3.b Implement and troubleshoot PPP


  1.3.b (i) authentication (PAP, CHAP)


  1.3.b (ii) PPPoE


  1.3.b (iii) MLPPP


  1.4 Troubleshooting layer 2 technologies


  1.4.a Use IOS troubleshooting tools


  1.4.a (i) debug, conditional debug


  1.4.a (ii) ping, traceroute with extended options


  1.4.a (iii) Embedded packet capture


  1.4.b Apply troubleshooting methodologies


  1.4.b (i) Diagnose the root cause of networking issue (analyze symptoms, identify and describe root cause)


  1.4.b (ii) Design and implement valid solutions according to constraints


  1.4.b (iii) Verify and monitor resolution


  1.4.c Interpret packet capture


  1.4.c (i) Using wireshark trace analyzer


  1.4.c (ii) Using IOS embedded packet capture


  40% 2.0 Layer 3 Technologies


  2.1 Addressing technologies


  2.1.a Identify, implement and troubleshoot IPv4 addressing and sub-netting


  2.1.a (i) Address types, VLSM


  2.1.a (ii) ARP


  2.1.b Identify, implement and troubleshoot IPv6 addressing and sub-netting


  2.1.b (i) Unicast, multicast


  2.1.b (ii) EUI-64


  2.1.b (iii) ND, RS/RA


  2.1.b (iv) Autoconfig/SLAAC temporary addresses (RFC4941)


  2.1.b (v) Global prefix configuration feature


  2.2 Layer 3 Multicast


  2.2.a Troubleshoot reverse path forwarding


  2.2.a (i) RPF failure


  2.2.a(ii) RPF failure with tunnel interface


  2.2.b Implement and troubleshoot IPv4 protocol independent multicast


  2.2.b (i) PIM dense mode, sparse mode, sparse-dense mode


  2.2.b (ii) Static RP, auto-RP, BSR


  2.2.b (iii) Bidirectional PIM


  2.2.b (iv) Source-specific multicast


  2.2.b (v) Group to RP mapping


  2.2.b (vi) Multicast boundary


  2.2.c Implement and troubleshoot multicast source discovery protocol


  2.2.c.(i) Intra-domain MSDP (anycast RP)


  2.2.c.(ii) SA filter


  2.3 Fundamental routing concepts


  2.3.a Implement and troubleshoot static routing


  2.3.b Implement and troubleshoot default routing


  2.3.c Compare routing protocol types


  2.3.c (i) distance vector


  2.3.c (ii) link state


  2.3.c (iii) path vector


  2.3.d Implement, optimize and troubleshoot administrative distance


  2.3.e Implement and troubleshoot passive interface


  2.3.f Implement and troubleshoot VRF lite


  2.3.g Implement, optimize and troubleshoot filtering with any routing protocol


  2.3.h Implement, optimize and troubleshoot redistribution between any routing protocol


  2.3.i Implement, optimize and troubleshoot manual and auto summarization with any routing protocol


  2.3.j Implement, optimize and troubleshoot policy-based routing


  2.3.k Identify and troubleshoot sub-optimal routing


  2.3.l Implement and troubleshoot bidirectional forwarding detection


  2.3.m Implement and troubleshoot loop prevention mechanisms


  2.3.m (i) Route tagging, filtering


  2.3.m (ii) Split horizon


  2.3.m (iii) Route poisoning


  2.3.n Implement and troubleshoot routing protocol authentication


  2.3.n (i) MD5


  2.3.n (ii) key-chain


  2.3.n (iii) EIGRP HMAC SHA2-256bit


  2.3.n (iv) OSPFv2 SHA1-196bit


  2.3.n (v) OSPFv3 IPsec authentication


  2.4 RIP v2


  2.4.a Implement and troubleshoot RIPv2


  2.5 EIGRP (for IPv4 and IPv6)


  2.5.a Describe packet types


  2.5.a (i) Packet types (hello, query, update, and such)


  2.5.a (ii) Route types (internal, external)


  2.5.b Implement and troubleshoot neighbor relationship


  2.5.b (i) Multicast, unicast EIGRP peering


  2.5.c Implement and Troubleshoot Loop free path selection


  2.5.c (i) RD, FD, FC, successor, feasible successor


  2.5.c (ii) Classic metric


  2.5.c (iii) Wide metric


  2.5.d Implement and troubleshoot operations


  2.5.d (i) General operations


  2.5.d (ii) Topology table, update, query, active, passive


  2.5.d (iii) Stuck in active


  2.5.d (iv) Graceful shutdown


  2.5.e Implement and troubleshoot EIGRP stub


  2.5.e (i) stub


  2.5.e (ii) leak-map


  2.5.f Implement and troubleshoot load-balancing


  2.5.f (i) equal-cost


  2.5.f (ii) unequal-cost


  2.5.f (iii) add-path


  2.5.g Implement EIGRP (multi-address) named mode


  2.5.g (i) Types of families


  2.5.g (ii) IPv4 address-family


  2.5.g (iii) IPv6 address-family


  2.5.h Implement, troubleshoot and optimize EIGRP convergence and scalability


  2.5.h (i) Describe fast convergence requirements


  2.5.h (ii) Control query boundaries


  2.5.h (iii) IP FRR/fast reroute (single hop)


  2.5.h (iv) Summary leak-map


  2.5.h (v) Summary metric


  2.6 OSPF (v2 and v3)


  2.6.a Describe packet types


  2.6.a (i) LSA types (1, 2, 3, 4, 5, 7, 9)


  2.6.a (ii) Route types (N1, N2, E1, E2)


  2.6.b Implement and troubleshoot neighbor relationship


  2.6.c Implement and troubleshoot OSPFv3 address-family support


  2.6.c (i) IPv4 address-family


  2.6.c (ii) IPv6 address-family


  2.6.d Implement and troubleshoot network types, area types and router types


  2.6.d (i) Point-to-point, multipoint, broadcast, non-broadcast


  2.6.d (ii) LSA types, area type: backbone, normal, transit, stub, NSSA, totally stub


  2.6.d (iii) Internal router, ABR, ASBR


  2.6.d (iv) Virtual link


  2.6.e Implement and troubleshoot path preference


  2.6.f Implement and troubleshoot operations


  2.6.f (i) General operations


  2.6.f (ii) Graceful shutdown


  2.6.f (iii) GTSM (generic TTL security mechanism)


  2013 Cisco Systems, Inc. This document is Cisco Public. Page 5


  2.6.g Implement, troubleshoot and optimize OSPF convergence and scalability


  2.6.g (i) Metrics


  2.6.g (ii) LSA throttling, SPF tuning, fast hello


  2.6.g (iii) LSA propagation control (area types, ISPF)


  2.6.g (iv) IP FR/fast reroute (single hop)


  2.6.g (v) LFA/loop-free alternative (multi hop)


  2.6.g (vi) OSPFv3 prefix suppression


  2.7 BGP


  2.7.a Describe, implement and troubleshoot peer relationships


  2.7.a (i) Peer-group, template


  2.7.a (ii) Active, passive


  2.7.a (iii) States, timers


  2.7.a (iv) Dynamic neighbors


  2.7.b Implement and troubleshoot IBGP and EBGP


  2.7.b (i) EBGP, IBGP


  2.7.b (ii) 4 bytes AS number


  2.7.b (iii) Private AS


  2.7.c Explain attributes and best-path selection


  2.7.d Implement, optimize and troubleshoot routing policies


  2.7.d (i) Attribute manipulation


  2.7.d (ii) Conditional advertisement


  2.7.d (iii) Outbound route filtering


  2.7.d (iv) Communities, extended communities


  2.7.d (v) Multi-homing


  2.7.e Implement and troubleshoot scalability


  2.7.e (i) Route-reflector, cluster


  2.7.e (ii) Confederations


  2.7.e (iii) Aggregation, AS set


  2.7.f Implement and troubleshoot multi-protocol BGP


  2.7.f (i) IPv4, IPv6, VPN address-family


  2.7.g Implement and troubleshoot AS path manipulations


  2.7.g (i) Local AS, allow AS in, remove private AS


  2.7.g (ii) Prepend


  2.7.g (iii) Regexp


  2.7.h Implement and Troubleshoot Other Features


  2.7.h (i) Multipath


  2.7.h (ii) BGP synchronization


  2.7.h (iii) Soft reconfiguration, route refresh


  2.8 Troubleshooting layer 3 technologies


  2.8.a Use IOS troubleshooting tools


  2.8.a (i) debug, conditional debug


  2.8.a (ii) ping, traceroute with extended options


  2.8.a (iii) Embedded packet capture


  2.8.b Apply troubleshooting methodologies


  2.8.b (i) Diagnose the root cause of networking issue (analyze symptoms, identify and describe root cause)


  2.8.b (ii) Design and implement valid solutions according to constraints


  2.8.b (iii) Verify and monitor resolution


  2.8.c Interpret packet capture


  2.8.c (i) Using wireshark trace analyzer


  2.8.c (ii) Using IOS embedded packet capture


  20% 3.0 VPN Technologies


  3.1 Tunneling


  3.1.a Implement and troubleshoot MPLS operations


  3.1.a (i) Label stack, LSR, LSP


  3.1.a (ii) LDP


  3.1.a (iii) MPLS ping, MPLS traceroute


  3.1.b Implement and troubleshoot basic MPLS L3VPN


  3.1.b (i) L3VPN, CE, PE, P


  3.1.b (ii) Extranet (route leaking)


  3.1.c Implement and troubleshoot encapsulation


  3.1.c (i) GRE


  3.1.c (ii) Dynamic GRE


  3.1.d Implement and troubleshoot DMVPN (single hub)


  3.1.d (i) NHRP


  3.1.d (ii) DMVPN with IPsec using preshared key


  3.1.d (iii) QoS profile


  3.1.d (iv) Pre-classify


  3.2 Encryption


  3.2.a Implement and troubleshoot IPsec with preshared key


  3.2.a (i) IPv4 site to IPv4 site


  3.2.a (ii) IPv6 in IPv4 tunnels


  3.2.a (iii) Virtual tunneling interface (VTI)


  3.3 Troubleshooting VPN technologies


  3.3.a Use IOS troubleshooting tools


  3.3.a (i) debug, conditional debug


  3.3.a (ii) ping, traceroute with extended options


  3.3.a (iii) Embedded packet capture


  3.3.b Apply troubleshooting methodologies


  3.3.b (i) Diagnose the root cause of networking issue (analyze symptoms, identify and describe root cause)


  3.3.b (ii) Design and implement valid solutions according to constraints


  3.3.b (iii) Verify and monitor resolution


  3.3.c Interpret packet capture


  3.3.c (i) Using wireshark trace analyzer


  3.3.c (ii) Using IOS embedded packet capture


  5% 4.0 Infrastructure Security


  4.1 Device security


  4.1.a Implement and troubleshoot IOS AAA using local database


  4.1.b Implement and troubleshoot device access control


  4.1.b (i) Lines (VTY, AUX, console)


  4.1.b (ii) SNMP


  4.1.b (iii) Management plane protection


  4.1.b (iv) Password encryption


  4.1.c Implement and troubleshoot control plane policing


  4.2 Network security


  4.2.a Implement and troubleshoot switch security features


  4.2.a (i) VACL, PACL


  4.2.a (ii) Stormcontrol


  4.2.a (iii) DHCP snooping


  4.2.a (iv) IP source-guard


  4.2.a (v) Dynamic ARP inspection


  4.2.a (vi) Port-security


  4.2.a (vii) Private VLAN


  4.2.b Implement and troubleshoot router security features


  4.2.b (i) IPv4 access control lists (standard, extended, time-based)


  4.2.b (ii) IPv6 traffic filter


  4.2.b (iii) Unicast reverse path forwarding


  4.2.c Implement and troubleshoot IPv6 first hop security


  4.2.c (i) RA guard


  4.2.c (ii) DHCP guard


  4.2.c (iii) Binding table


  4.2.c (iv) Device tracking


  4.2.c (v) ND inspection/snooping


  4.2.c (vi) Source guard


  4.2.c (vii) PACL


  4.3 Troubleshooting infrastructure security


  4.3.a Use IOS troubleshooting tools


  4.3.a (i) debug, conditional debug


  4.3.a (ii) ping, traceroute with extended options


  4.3.a (iii) Embedded packet capture


  4.3.b Apply troubleshooting methodologies


  4.3.b (i) Diagnose the root cause of networking issue (analyze symptoms, identify and describe root cause)


  4.3.b (ii) Design and implement valid solutions according to constraints


  4.3.b (iii) Verify and monitor resolution


  4.3.c Interpret packet capture


  4.3.c (i) Using wireshark trace analyzer


  4.3.c (ii) Using IOS embedded packet capture


  15% 5.0 Infrastructure Services


  5.1 System management


  5.1.a Implement and troubleshoot device management


  5.1.a (i) Console and VTY


  5.1.a (ii) telnet, HTTP, HTTPS, SSH, SCP


  5.1.a (iii) (T)FTP


  5.1.b Implement and troubleshoot SNMP


  5.1.b (i) v2c, v3


  5.1.c Implement and troubleshoot logging


  5.1.c (i) Local logging, syslog, debug, conditional debug


  5.1.c (ii) Timestamp


  5.2 Quality of service


  5.2.a Implement and troubleshoot end to end QoS


  5.2.a (i) CoS and DSCP mapping


  5.2.b Implement, optimize and troubleshoot QoS using MQC


  5.2.b (i) Classification


  5.2.b (ii) Network based application recognition (NBAR)


  5.2.b (iii) Marking using IP precedence, DSCP, CoS, ECN


  5.2.b (iv) Policing, shaping


  5.2.b (v) Congestion management (queuing)


  5.2.b (vi) HQoS, sub-rate ethernet link


  5.2.b (vii) Congestion avoidance (WRED)


  5.3 Network services


  5.3.a Implement and troubleshoot first-hop redundancy protocols


  5.3.a (i) HSRP, GLBP, VRRP


  5.3.a (ii) Redundancy using IPv6 RS/RA


  5.3.b Implement and troubleshoot network time protocol


  5.3.b (i) NTP master, client, version 3, version 4


  5.3.b (ii) NTP authentication


  5.3.c Implement and troubleshoot IPv4 and IPv6 DHCP


  5.3.c (i) DHCP client, IOS DHCP server, DHCP relay


  5.3.c (ii) DHCP options


  5.3.c (iii) DHCP protocol operations


  5.3.c (iv) SLAAC/DHCPv6 interaction


  5.3.c (v) Stateful, stateless DHCPv6


  5.3.c (vi) DHCPv6 prefix delegation


  5.3.d Implement and troubleshoot IPv4 network address translation


  5.3.d (i) Static NAT, dynamic NAT, policy-based NAT, PAT


  5.3.d (ii) NAT ALG


  5.4 Network optimization


  5.4.a Implement and troubleshoot IP SLA


  5.4.a (i) ICMP, UDP, jitter, VoIP


  5.4.b Implement and troubleshoot tracking object


  5.4.b (i) Tracking object, tracking list


  5.4.b (ii) Tracking different entities (e.g. interfaces, routes, IPSLA, and such)


  5.4.c Implement and troubleshoot netflow


  5.4.c (i) Netflow v5, v9


  5.4.c (ii) Local retrieval


  5.4.c (iii) Export (configuration only)


  5.4.d Implement and troubleshoot embedded event manager


  5.4.d (i) EEM policy using applet


  5.5 Troubleshooting infrastructure services


  5.5.a Use IOS troubleshooting tools


  5.5.a (i) debug, conditional debug


  5.5.a (ii) ping, traceroute with extended options


  5.5.a (iii) Embedded packet capture


  5.5.b Apply troubleshooting methodologies


  5.5.b (i) Diagnose the root cause of networking issue (analyze symptoms, identify and describe root cause)


  5.5.b (ii) Design and implement valid solutions according to constraints


  5.5.b (iii) Verify and monitor resolution


  5.5.c Interpret packet capture


  5.5.c (i) Using wireshark trace analyzer


  5.5.c (ii) Using IOS embedded packet capture


  想和兴趣相投的朋友们一起交流吗?那就来江苏万和计算机培训中心吧。而江苏万和作为南京专业的CCIE培训中心,也是Cisco等众多厂商的授权培训、考试机构,欢迎广大有志于此行业发展的学员们加入。

最近开班 more>
  • 全栈开发
  • 前端基础班
  • 软件测试
  • Java大数据开发工程师
  • 云原生精英班
  • 开发课程基础班第四期
  • 开发课程基础班第三期
  • 开发课程基础班第二期
  • 开发课程基础班第一期
  • Java Web UI Python
  • CISP
  • HCIE-Datacom(HCIA,HCIP基础)
  • HCIP-Datacom(HCIA基础)
  • HCIA-Datacom(0基础)
  • HCIE-Datacom(HCIA,HCIP基础)
  • HCIP-Datacom(HCIA基础)
  • HCIA-Datacom(0基础)
  • OCM 12C
  • OCP 19C
  • RHCE 9.0
  • 脱产班
  • 脱产班
  • 脱产班
  • 脱产班
  • 脱产班
  • 脱产班
  • 脱产班
  • 脱产班
  • 脱产班
  • vip班
  • 考试计划
  • 脱产班
  • 脱产班
  • 脱产班
  • 双休班
  • 双休班
  • 双休班
  • 双休班
  • 业余班
  • 业余班
  • 10月16日
  • 9月23日
  • 9月2日
  • 9月30日
  • 8月26日
  • 10月8日
  • 9月23日
  • 9月16日
  • 9月9日
  • 随时开课
  • 9月21日
  • 10月17日
  • 9月18日
  • 9月2日
  • 11月2日
  • 10月26日
  • 9月7日
  • ——
  • 随时开课
  • 9月26日
    • 姓 名 :
    • 电 话 :
    • 课 程 :

技术交流群

  • Java大数据交流群560819979加入
  • Python技术交流群595083299加入
  • Oracle技术交流群595119011加入
  • Web前端技术交流群604697610加入
  • Huawei技术交流群482919361加入
  • Redhat技术交流群587875348加入
  • UI设计技术交流群511649801加入
  • Cisco技术交流群596886705加入
  • IT运维技术交流群605888381加入